Cruise Control Valve; Cruise Cancel Switches - Honda Goldwing GL1200L 1985 Manual

Cruise Control
Cruise Control Valve
( c o n t ' d ) - - - - - - - - - - - - - - - - - - -
Remove the two screws to release the valve.
EXCHANGE
tors.
Disconnect the vacuum hoses from the valve.
Disconnect the
'"'v........."' ,
cap from the valve.
CAUTION: The plastic connectors are fragile. Pull the
straight off; side stress may break the cormec·
Remove the air
VACUUM HOSES
Cruise Cancel Switches - - - - - - - - - - - - - - - - - -
Brake
Check for
,...r.r,tinlilih,
between the BI/Bu and G/W wire
terminals.
EXCHANGE
/
BLACK .liP COUPLER
behind the right
Brake lever released:
Cnnth"llliirv
Brake lever
in:
Disconnect the black 4P
handlebar.
If unable to obtain the above results, check for continuity
at the switch terminal. If switch continuity is normal,
check the sub·harness for If is ab·
flUrl!"""
install a new switch.
Remove the screw and disconnect the wires from the
switch.
NOTE: When
jnl::t~lIinn
the align the switch pin
with the master hole. Connect the wires to the
correct size terminals.
13..16