Texas Instruments SimpleLink CC2620 Technical Reference Manual page 1293

www.ti.com
17.7.6.6 T1CTL Register (Offset = 14h) [reset = 0h]
T1CTL is shown in
Timer 1 Control
Run Control/Status For Timer 1
31 30 29 28
15 14 13 12
Bit Field
31-1 RESERVED
0 EN
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Figure 17-61 and described in
Figure 17-61. T1CTL Register
27 26 25
11 10 9
RESERVED
Table 17-85. T1CTL Register Field Descriptions
Type Reset
R 0h
R/W 0h
Copyright © 2015, Texas Instruments Incorporated
Table 17-85.
24 23 22 21
RESERVED
R-0h
8 7 6 5
R-0h
Description
Software must not rely on the value of a reserved. Writing any other
value than the reset value may result in undefined behavior.
Timer 1 run enable control. The counter restarts when enabling the
timer. If T1CFG.RELOAD = 0, the timer is automatically disabled
when reaching T1TARGET.VALUE
0: Disable timer 1
1: Enable timer 1
AUX – Sensor Controller with Digital and Analog Peripherals
AUX – Sensor Controller Registers
20 19 18 17
4 3 2 1
16
0
EN
R/W-
0h
1293