Texas Instruments SimpleLink CC2620 Technical Reference Manual page 1227

www.ti.com
17.7.1.9 ADC1 Register (Offset = 9h) [reset = 0h]
ADC1 is shown in
ADC Control 1
7 6
Bit Field
7-1 RESERVED
0 SCALE_DIS
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Figure 17-11 and described in
Figure 17-11. ADC1 Register
5 4
RESERVED
R/W-0h
Table 17-30. ADC1 Register Field Descriptions
Type Reset
R/W 0h
R/W 0h
Copyright © 2015, Texas Instruments Incorporated
Table 17-30.
3 2
Description
Software must not rely on the value of a reserved. Writing any other
value than the reset value may result in undefined behavior.
Internal. Only to be used through TI provided API.
AUX – Sensor Controller with Digital and Analog Peripherals
AUX – Sensor Controller Registers
1 0
SCALE_DIS
R/W-0h
1227