Texas Instruments SimpleLink CC2620 Technical Reference Manual page 1148

Watchdog Timer Registers
15.4.1.1 LOAD Register (Offset = 0h) [reset = FFFFFFFFh]
LOAD is shown in
Configuration
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
Bit Field
31-0 WDTLOAD
1148
Watchdog Timer
Figure 15-2 and described in
Figure 15-2. LOAD Register
R/W-FFFFFFFFh
Table 15-2. LOAD Register Field Descriptions
Type Reset
R/W FFFFFFFFh This register is the 32-bit interval value used by the 32-bit counter.
Copyright © 2015, Texas Instruments Incorporated
Table 15-2.
WDTLOAD
Description
When this register is written, the value is immediately loaded and the
counter is restarted to count down from the new value. If this register
is loaded with 0x0000.0000, an interrupt is immediately generated.
SWCU117C – February 2015 – Revised September 2015
www.ti.com
9 8 7 6 5 4 3 2
Submit Documentation Feedback
1 0