Texas Instruments SimpleLink CC2620 Technical Reference Manual page 1565

www.ti.com
Condition
Performed Action Number1 after running receiver
Performed Action Number3 after running receiver
Performed Action Number4 after running receiver
Performed Action Number5 after running receiver
Observed trigger indicated by pParams->endTrigger, then performed
Action Number1, 3, or 5
Observed CMD_STOP, then performed Action Number1, 3, or 5
Received CMD_ABORT
No space in RX buffer to store received packet
Illegal value of channel
Advertising data length field has illegal value
23.6.4.4.3 Nonconnectable Advertiser Command
An advertiser operation that is not connectable is started by a CMD_BLE_ADV_NC command. In the
command structure, it has a pParams parameter of the type defined in
parameter of the type defined in
described in Section
any receive operation.
An advertiser operation that is not connectable ends with one of the statuses listed in
status field of the command structure after the operation is ended indicates the reason why the operation
ended. In all cases, a COMMAND_DONE interrupt is raised. In each case, it is indicated if the result is
TRUE, FALSE, or ABORT, which decides the next action.
Condition
Transmitted ADV_NONCONN_IND
Observed trigger indicated by pParams->endTrigger, then finished
transmitting ADV_NONCONN_IND
Observed CMD_STOP, then finished transmitting
ADV_NONCONN_IND
Received CMD_ABORT
Illegal value of channel
Advertising data length field has illegal value
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Table 23-119. End of Directed-advertiser Operation
Table 23-99. The operation starts with transmission and operates as
23.6.4.4. After transmission of an ADV_NONCONN_IND, the operation ends without
Table 23-120. End of Nonconnectable Advertiser Operation
Copyright © 2015, Texas Instruments Incorporated
Status Code
BLE_DONE_OK
BLE_DONE_RXERR
BLE_DONE_CONNECT
BLE_DONE_NOSYNC
BLE_DONE_ENDED
BLE_DONE_STOPPED
BLE_DONE_ABORT
BLE_ERROR_RXBUF
BLE_ERROR_PAR
BLE_ERROR_PAR
Table 23-93, and a pOutput
Status Code
BLE_DONE_OK
BLE_DONE_ENDED
BLE_DONE_STOPPED
BLE_DONE_ABORT
BLE_ERROR_PAR
BLE_ERROR_PAR
Bluetooth Low Energy
Result
TRUE
TRUE
FALSE
TRUE
FALSE
FALSE
ABORT
FALSE
ABORT
ABORT
Table 23-120. The
Result
TRUE
FALSE
FALSE
ABORT
ABORT
ABORT
1565
Radio