Texas Instruments SimpleLink CC2620 Technical Reference Manual page 1118

General-purpose Timer Registers
13.5.1.22 RTCPD Register (Offset = 58h) [reset = 7FFFh]
RTCPD is shown in
RTC Pre-divide Value
This register shows the current value of the RTC pre-divider in RTC mode. Note: When the alternate timer
clock (TIMCLK) is enabled, a read of a timer value will return the current count -1.
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
RESERVED
Bit Field
31-16 RESERVED
15-0 RTCPD
1118
Timers
Figure 13-30 and described in
Figure 13-30. RTCPD Register
R-0h
Table 13-29. RTCPD Register Field Descriptions
Type Reset
R 0h
R 7FFFh
Copyright © 2015, Texas Instruments Incorporated
Table 13-29.
9
RTCPD
R-7FFFh
Description
Software must not rely on the value of a reserved. Writing any other
value than the reset value may result in undefined behavior.
GPT RTC Pre-divider
SWCU117C – February 2015 – Revised September 2015
www.ti.com
8 7 6 5 4 3 2 1
Submit Documentation Feedback
0