Texas Instruments SimpleLink CC2620 Technical Reference Manual page 1101

www.ti.com
Bit Field
7-6 RESERVED
5 DMAAIM
4 TAMIM
3 RTCIM
2 CAEIM
1 CAMIM
0 TATOIM
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Table 13-13. IMR Register Field Descriptions (continued)
Type Reset
R 0h
R/W 0h
R/W 0h
R/W 0h
R/W 0h
R/W 0h
R/W 0h
Copyright © 2015, Texas Instruments Incorporated
Description
Software must not rely on the value of a reserved. Writing any other
value than the reset value may result in undefined behavior.
Enabling this bit will make the RIS.DMAARIS interrupt propagate to
MIS.DMAAMIS
0h = Disable Interrupt
1h = Enable Interrupt
Enabling this bit will make the RIS.TAMRIS interrupt propagate to
MIS.TAMMIS
0h = Disable Interrupt
1h = Enable Interrupt
Enabling this bit will make the RIS.RTCRIS interrupt propagate to
MIS.RTCMIS
0h = Disable Interrupt
1h = Enable Interrupt
Enabling this bit will make the RIS.CAERIS interrupt propagate to
MIS.CAEMIS
0h = Disable Interrupt
1h = Enable Interrupt
Enabling this bit will make the RIS.CAMRIS interrupt propagate to
MIS.CAMMIS
0h = Disable Interrupt
1h = Enable Interrupt
Enabling this bit will make the RIS.TATORIS interrupt propagate to
MIS.TATOMIS
0h = Disable Interrupt
1h = Enable Interrupt
General-purpose Timer Registers
Timers
1101