Texas Instruments SimpleLink CC2620 Technical Reference Manual page 1527

www.ti.com
Bits Bit Field Name
0 frameFiltEn
1 frameFiltStop
2 autoAckEn
3 slottedAckEn
4 autoPendEn
5 defaultPend
6 bPendDataReqOnly
7 bPanCoord
8–9 maxFrameVersion
10–12 fcfReservedMask
13–14 modifyFtFilter
15 bStrictLenFilter
Bits
0
1
2
3
4
5
6
7
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Table 23-71. Frame Filtering Configuration Bit Field
Description
0: Disable frame filtering
1: Enable frame filtering
0: Receive all packets to the end
1: Stop receiving frame once frame filtering has caused the frame to be
rejected
0: Disable auto ACK
1: Enable auto ACK
0: Nonslotted ACK
1: Slotted ACK
0: Auto-pend disabled
1: Auto-pend enabled
The value of the pending data bit in auto ACK packets that are not subject to
auto-pend
0: Use auto-pend for any packet
1: Use auto-pend for data request packets only
0: Device is not PAN coordinator
1: Device is PAN coordinator
Reject frames where the frame version field in the FCF is greater than this
value
Value to be AND-ed with the reserved part of the FCF; frame rejected if
result is nonzero
Treatment of MSB of frame type field before frame-type filtering:
0: No modification
1: Invert MSB
2: Set MSB to 0
3: Set MSB to 1
0: Accept acknowledgment frames of any length >= 5
1: Accept only acknowledgment frames of length 5
Table 23-72. Frame Type Filtering Bit Field
Bit Field Name
bAcceptFt0Beacon
bAcceptFt1Data
bAcceptFt2Ack
bAcceptFt3MacCmd
bAcceptFt4Reserved
bAcceptFt5Reserved
bAcceptFt6Reserved
bAcceptFt7Reserved
Copyright © 2015, Texas Instruments Incorporated
Description
Treatment of frames with frame type 000 (beacon):
0: Reject
1: Accept
Treatment of frames with frame type 001 (data):
0: Reject
1: Accept
Treatment of frames with frame type 010 (ACK):
0: Reject, unless running ACK receive command
1: Always accept
Treatment of frames with frame type 011 (MAC command):
0: Reject
1: Accept
Treatment of frames with frame type 100 (reserved):
0: Reject
1: Accept
Treatment of frames with frame type 101 (reserved):
0: Reject
1: Accept
Treatment of frames with frame type 110 (reserved):
0: Reject
1: Accept
Treatment of frames with frame type 111 (reserved):
0: Reject
1: Accept
IEEE 802.15.4
1527
Radio