Texas Instruments SimpleLink CC2620 Technical Reference Manual page 1290

AUX – Sensor Controller Registers
17.7.6.3 T0CTL Register (Offset = 8h) [reset = 0h]
T0CTL is shown in
Timer 0 Control
Run control/status for timer 0
31 30 29 28
15 14 13 12
Bit Field
31-1 RESERVED
0 EN
1290
AUX – Sensor Controller with Digital and Analog Peripherals
Figure 17-58 and described in
Figure 17-58. T0CTL Register
27 26 25
11 10 9
RESERVED
Table 17-82. T0CTL Register Field Descriptions
Type Reset
R 0h
R/W 0h
Copyright © 2015, Texas Instruments Incorporated
Table 17-82.
24 23 22 21
RESERVED
R-0h
8 7 6 5
R-0h
Description
Software must not rely on the value of a reserved. Writing any other
value than the reset value may result in undefined behavior.
Timer 0 run enable control. The counter restarts when enabling the
timer. If T0CFG.RELOAD = 0, the timer is automatically disabled
when reaching T0TARGET.VALUE
0: Disable timer 0
1: Enable timer 0
SWCU117C – February 2015 – Revised September 2015
www.ti.com
20 19 18 17
4 3 2 1
Submit Documentation Feedback
16
0
EN
R/W-
0h