Chrysler 2005 Crossfire SRT6 Service Manual page 1202

8L - 136 LAMPS/LIGHTING - INTERIOR - ELECTRICAL DIAGNOSTICS
*GLOVE BOX LAMP INOPERATIVE (CONTINUED)
3.
MEASURE GLOVE BOX LAMP GROUND CIRCUIT RESISTANCE
Turn the ignition off.
Measure the resistance between ground and the Glove Box Lamp har-
ness connector cavity 1.
Is the resistance below 5.0 ohms?
Yes >> Replace the Glove Box Lamp. (Refer to 8 - ELECTRICAL/
LAMPS/LIGHTING - INTERIOR/GLOVE BOX LAMP -
REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Glove Box Lamp ground circuit for an open.
Perform BODY VERIFICATION TEST.
ZH