Chrysler 2005 Crossfire SRT6 Service Manual page 1026

8J - 72 INSTRUMENT CLUSTER - SERVICE INFORMATION
ZH
INSTRUMENT CLUSTER DIGITAL DISPLAYS
There are five electronic digital displays that show
cumulative odometer, trip odometer, time, outside
ambient air temperature, and, if equipped, automatic
transmission range or gear.
Speedometer
The two digital displays integrated in the speedometer
will display the odometer reading, and the trip odom-
eter. The trip odometer (1) can be reset at anytime.
The odometer (1) display also shows the distance
remaining to the next regular maintenance service as
calculated by the FSS. Pressing the control dial to the
left (3) of the speedometer resets the trip odometer.
One press is used if the ignition switch is in the "RUN"
position, two presses with the ignition switch in other
positions or with the key removed. The trip and cumu-
lative odometer displays are also used to indicate
engine oil level.
Tachometer
The two digital displays integrated in the tachometer
will display the transmission range selection, and the
current time. The transmission display shows P, R, N
or D under normal driving conditions. The clock will
display in 12 hour increments. The control dial located
between the tachometer and the speedometer resets
the digital clock.