Chrysler 2005 Crossfire SRT6 Service Manual page 1460

8O - 104 RESTRAINTS - SERVICE INFORMATION
Note: Typically, both initiators are used during an airbag deployment event. However, it is possible for only
one initiator to be used during a deployment due to an airbag system fault; therefore, it is necessary to
always confirm that both initiators have been used in order to avoid the improper disposal of potentially live
pyrotechnic materials.
REMOVAL
1. Before attempting any service to the airbag system, refer to the warnings in this section. (Refer to 8 - ELEC-
TRICAL/RESTRAINTS - WARNING).
2. Disconnect the negative battery cable (2). Wait two
minutes for the system capacitor to discharge
before further service.
3. Remove the upper section (1) of instrument panel-
(Refer to 23 - BODY/INSTRUMENT PANEL/IN-
STRUMENT PANEL ASSEMBLY - REMOVAL).
ZH