Chrysler 2005 Crossfire SRT6 Service Manual page 1492

8O - 136 RESTRAINTS - SERVICE INFORMATION
INSPECTION
1. Inspect the Occupant Restraint Controller (ORC)
with the DRB III .
2. Read and record all DTCs.
3. Inspect the Seat Belt Tensioner squib status:
1. Red Pin (1) is visible: All squibs have been fired.
2. Red Pin (1) is not visible: All squibs have not
been fired.
INSTALLATION
1. Verify the negative battery cable (2) is discon-
nected before proceeding. Wait two minutes for
the system capacitor to discharge before fur-
ther service.
ZH