Chrysler 2005 Crossfire SRT6 Service Manual page 1299

ZH
INSTALLATION
INSTALLATION - REARVIEW MIRROR
1. Feed the mirror harness connector into the head-
liner and connect.
2. Install the courtesy lamp. (Refer to 8 - ELECTRI-
CAL/LAMPS/LIGHTING - INTERIOR/COURTESY
LAMP SWITCH - INSTALLATION).
3. Position the mirror base over the mounting plate so
that it is flush with the windshield surface.
4. Rotate the mirror base approximately 90 degrees
until the hole is positioned downward.
5. Connect the negative battery cable.
POWER MIRRORS - SERVICE INFORMATION 8N - 69