Chrysler 2005 Crossfire SRT6 Service Manual page 1534

8Q - 28 VEHICLE THEFT SECURITY - ELECTRICAL DIAGNOSTICS
NO CAN COMMUNICATIONS WITH PCM (CONTINUED)
2.
MEASURE THE RESISTANCE OF THE CAN C BUS (-) CIRCUIT
Measure the resistance of the CAN C Bus (-) circuit from the SKREEM
harness connector and the PCM harness connector.
Is the resistance below 1.0 ohm?
Yes >> Replace the Sentry Key Remote Entry Module. (Refer to 8
- ELECTRICAL/VEHICLE THEFT SECURITY/SENTRY
KEY REMOTE ENTRY MODULE - REMOVAL).
Perform VTSS VERIFICATION TEST.
No >> Repair the CAN C Bus (-) circuit for an open.
Perform VTSS VERIFICATION TEST.
ZH