Chrysler 2005 Crossfire SRT6 Service Manual page 744

8E - 42 ELECTRONIC CONTROL MODULES - ELECTRICAL DIAGNOSTICS
*NO RESPONSE FROM CONTROLLER ANTILOCK BRAKE (CONTINUED)
5.
GROUND CIRCUIT(S) OPEN
Turn the ignition off.
Measure the resistance of the Ground circuits from the CAB harness
connector to ground.
Is the resistance below 5.0 ohms?
Yes >> Go to 6
No >> Repair the Ground circuit(s) for an open.
Perform ABS VERIFICATION TEST.
6.
SCI TRANSMIT CIRCUIT OPEN
With the ignition off.
Measure the resistance of the SCI Transmit circuit from the CAB har-
ness connector to the DLC.
Is the resistance below 5.0 ohms?
Yes >> Replace the Controller Antilock Brake. (Refer to 8 - ELEC-
TRICAL/ELECTRONIC CONTROL MODULES/CONTROL-
LER ANTILOCK BRAKE - REMOVAL).
Perform ABS VERIFICATION TEST.
No >> Repair the SCI Transmit circuit for an open.
Perform ABS VERIFICATION TEST.
ZH