Chrysler 2005 Crossfire SRT6 Service Manual page 1062

8J - 108 INSTRUMENT CLUSTER - SERVICE INFORMATION
1. Disconnect the negative battery cable.
2. Remove the steering wheel.(Refer to 19 - STEER-
ING/COLUMN/STEERING WHEEL - REMOVAL).
3. Remove the lower instrument panel cover (2).
4. Remove the Instrument Cluster outer bezel (1).
Note: To ease the removal of the Instrument Clus-
ter outer bezel, carefully pry the bezel from the top
edge to disengage the retaining tabs from the
Instrument Panel.
5. Remove the retaining screws from Instrument Clus-
ter.
6. Rotate the Instrument Cluster away from the Instru-
ment Panel.
7. Disconnect the Instrument Cluster harness connec-
tors from the back of the Instrument Cluster.
8. Remove the Instrument Cluster from the vehicle.
ZH