Chrysler 2005 Crossfire SRT6 Service Manual page 891

ZH
*LEFT HEATED SEAT INOPERATIVE (CONTINUED)
2.
MEASURE LEFT HEATED SEAT OUTPUT CIRCUIT RESISTANCE
Disconnect the Left Heated Seat Back/Heated Seat Cushion harness
connector.
Note: Check connector - Clean/repair as necessary.
Measure the resistance of the Left Heated Seat Output circuit from the
Heated Seat Module harness connector to the Left Heated Seat Back/
Heated Seat Cushion harness connector.
Is the resistance below 5.0 ohms?
Yes >> Go to 3
No >> Repair the Left Heated Seat Output circuit for an open.
Perform BODY VERIFICATION TEST.
3.
MEASURE LEFT HEATED SEAT GROUND CIRCUIT RESISTANCE
Measure the resistance between ground and the Left Heated Seat
Ground circuit.
Is the resistance below 5.0 ohms?
Yes >> Replace the Left Heated Seat Back/Heated Seat Cushion
Element. (Refer to 8 - ELECTRICAL/HEATED SEATS/
HEATED SEAT BACK ELEMENT - REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Left Heated Seat Ground circuit for an open.
Perform BODY VERIFICATION TEST.
HEATED SEATS - ELECTRICAL DIAGNOSTICS 8G - 31