8R - 42
WIPERS/WASHERS - SERVICE INFORMATION
INSTALLATION
1. Install the washer nozzle (1) into the cowl grille (2).
Press downward with a rocking motion until the
retaining clip is fully seated.
2. Slide the washer hose clamps (1) onto the washer
hose (2).
3. Install the washer hose (2) over the washer nozzle
(3).
4. Tighten the washer clamps (1) onto the washer
nozzle (3) allowing approximately 0.78 inch (20
mm) clearance between the washer hoses.
ZH