Chrysler 2005 Crossfire SRT6 Service Manual page 792

8E - 90 ELECTRONIC CONTROL MODULES - SERVICE INFORMATION
2. Rotate the base plate and install it over the mount-
ing studs on the floor panel.
Note: Be sure not to pinch or cause interference
with the wiring harnesses while locating the base
plate to the floor mounting studs.
3. Install the three plastic retaining nuts (1) and
secure the base plate to the vehicle floor.
4. Install the foam insulation panel.
Note: Make sure the aligning tabs of the base
plate are positioned correctly in the foam insulat-
ing panel.
5. Install the carpeting in the passenger footwell.
6. Install the floor mat to the carpet.
ZH