ZH
INSTALLATION
CAUTION: During installation, do not allow the
wiper module to contact the windshield.
1. Align the wiper module into the cowl over the two
upper attachment nut mounting studs (1).
2. Install the two wiper module upper attachment nuts
and secure.
3. Install the lower wiper module attachment bolt
through the hole (2) in the cowl and secure.
4. Install the cowl grille drain (1) into the cowl and
rotate clockwise to secure. Insure the grommet is
seated fully.
WIPERS/WASHERS - SERVICE INFORMATION 8R - 59