Chrysler 2005 Crossfire SRT6 Service Manual page 1617

ZH
REMOVAL
WARNING: THE WINDSHIELD WIPER MECHANISM CAN PINCH, CRUSH OR, IN EXTREME CASES, EVEN
SEVER EXTREMITIES. ALWAYS REMOVE THE IGNITION KEY WHEN WORKING ON WINDSHIELD WIPER
MECHANISM.
1. Open the hood, then press the hood prop release button on the hood prop outer sleeve to extend the hood prop
fully (1).
2. Lift the wiper arm (2) to its over-center position.
3. Carefully pry the plastic nut cap (5) off of the pivot end of the wiper arm (2).
4. Remove the wiper arm attachment nut (4) from the wiper pivot shaft (3).
5. Use a suitable battery terminal puller to disengage the wiper arm from the wiper pivot shaft tapered splines.
Corrosion between the wiper arm and the pivot shaft may cause this to be difficult. Use caution so as to not
damage the pivot shaft or the threads.
6. Remove the wiper arm pivot end from the wiper pivot shaft (3).
WIPERS/WASHERS - SERVICE INFORMATION 8R - 47