Chrysler 2005 Crossfire SRT6 Service Manual page 1444

8O - 88 RESTRAINTS - SERVICE INFORMATION
ZH
OCCUPANT RESTRAINT CONTROLLER
DESCRIPTION
The Occupant Restraint Controller (ORC) is located
on the floor beneath the center console. It is secured
by four screws to a stamped steel mounting bracket.
The arrow which is printed on the label located on the
top of the ORC housing (1) provides a visual verifica-
tion of the proper orientation and should always face
the front of the vehicle.
The ORC cannot be repaired or adjusted, and if dam-
aged or faulty, it must be replaced.
OPERATION
The microprocessor in the Occupant Restraint Controller (ORC) contains the Supplemental Restraint System (SRS)
logic circuits and controls all of the SRS components. The Occupant Restraint Controller (ORC) uses On-Board
Diagnostics (OBD) and Controller Area Network (CAN) to communicate with other electronic modules in the vehicle
as well as with the DRBIII scan tool.
The Occupant Restraint Controller (ORC) microprocessor continuously monitors all of the Supplemental Restraint
System (SRS) electrical circuits to determine the system status. If the Occupant Restraint Controller (ORC) detects