Chrysler 2005 Crossfire SRT6 Service Manual page 1484

8O - 128 RESTRAINTS - SERVICE INFORMATION
3. Move the seat to the full forward position.
Note: The seat track rear bolts are easily accessed
when the seat back is tilted fully forward.
4. Remove the seat track rear bolts (1).
5. Remove the seat belt bolt (2) holding the seat belt
to the seat.
6. Tilt the seat back, to gain access to the bottom of
the seat.
7. Disconnect the power seat harness connectors.
8. Carefully remove the seat from the vehicle.
9. Disconnect the seat belt buckle harness connector
and remove the bolt (1) attaching the belt buckle to
the seat.
ZH