Chrysler 2005 Crossfire SRT6 Service Manual page 1269

ZH
Note: Before removal, mark the installed position
of the guide rail for realignment during installa-
tion.
4. Remove the lower cover plug (3) and remove the
guide rail attachment bolts (2).
5. Remove the guide rail through the installation
opening.
6. Remove the inside handle release cable (8) and
the driver door latch assembly harness connector.
7. Disconnect the pneumatic supply line (2) from the
lock actuator on the door latch assembly.
8. Remove the door latch assembly attachment
screws (1).
9. Remove the door latch assembly (3) from the door
through the installation opening.
POWER LOCKS - SERVICE INFORMATION 8N - 39