Chrysler 2005 Crossfire SRT6 Service Manual page 1557

ZH
SECURITY SYSTEM MODULE
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the trunk floor carpet.
3. Remove the right side interior trim panel (4).
4. Remove the upper right roof trim panel (1).
5. Remove the rear interior trim panel (2).
6. Remove the right half of the floor covering (3).
7. Remove the sound deadening foam material from
the central locking pump/security system module.
8. Disconnect the air lines (2) and the electrical har-
ness (1) from the central locking pump/security
system module (3) and remove the module.
VEHICLE THEFT SECURITY - SERVICE INFORMATION 8Q - 51