Chrysler 2005 Crossfire SRT6 Service Manual page 1493

ZH
2. Position the seat belt tensioner in the vehicle.
3. Install the bolt (1) attaching the seat belt tensioner
to the vehicle. Tighten to 35 N·m (26 ft. lbs.).
4. Connect the seat belt tensioner squib harness con-
nector (1).
CAUTION: Use caution when connecting the squib
harness connector to the inflator connector recep-
tacle. Improper assembly of these wires and their
connector insulators can result in damage to the
airbag circuits or connector insulators.
5. Install the bolt (1) on the upper belt guide. Tighten
to 35 N·m (26 ft. lbs.).
RESTRAINTS - SERVICE INFORMATION 8O - 137