Chrysler 2005 Crossfire SRT6 Service Manual page 1322

8N - 92 POWER SEATS - ELECTRICAL DIAGNOSTICS
*PASSENGER POWER SEAT HORIZONTAL MOTOR INOPERATIVE (CONTINUED)
PASSENGER POWER SEAT HORIZONTAL MOTOR
PASSENGER POWER SEAT HORIZONTAL MOTOR CIRCUIT
PASSENGER POWER SEAT SWITCH
For a complete Power Seats Circuit Diagram, (Refer to 8 - ELECTRICAL/POWER SEATS - SCHEMATICS AND
DIAGRAMS).
Diagnostic Test
1.
TEST THE PASSENGER POWER SEAT HORIZONTAL MOTOR
Turn the ignition off.
Disconnect the Passenger Power Seat Horizontal Motor connector.
Note: Check connectors - Clean/repair as necessary.
Connect a jumper wire from B(+) to one cavity of the Passenger
Power Seat Horizontal Motor connector (motor side).
Connect a second jumper wire from ground to the other cavity of the
Passenger Power Seat Horizontal Motor connector (motor side).
Note seat movement, if no seat movement is noted, reverse the
jumper wires at the Horizontal Motor connector.
Did the Passenger Power Seat move backward or forward?
Yes >> Replace the Passenger Power Seat Switch. (Refer to 8 -
ELECTRICAL/POWER SEATS/DRIVER SEAT SWITCH -
REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Replace the Passenger Power Seat Horizontal Motor. (Refer to 8 - ELECTRICAL/POWER SEATS/HOR-
IZONTAL MOTOR - REMOVAL).
Perform BODY VERIFICATION TEST.
POSSIBLE CAUSES
ZH