Chrysler 2005 Crossfire SRT6 Service Manual page 1505

ZH
INSTALLATION
1. Connect the wiring to the column.
2. Connect the electrical connectors on the steering
column.
3. Install the screw (1) attaching the speed control
switch to the multifunction switch.
4. Install the lower instrument panel. (Refer to 23 -
BODY/INSTRUMENT
PANEL ASSEMBLY - INSTALLATION).
5. Install the clockspring. (Refer to 8 - ELECTRICAL/
RESTRAINTS/CLOCKSPRING - INSTALLATION).
6. Install the steering wheel. (Refer to 19 - STEER-
ING/COLUMN/STEERING WHEEL - INSTALLA-
TION).
7. Connect the negative battery cable.
PANEL/INSTRUMENT
SPEED CONTROL - SERVICE INFORMATION 8P - 11