Chrysler 2005 Crossfire SRT6 Service Manual page 1566

8Q - 60 VEHICLE THEFT SECURITY - SERVICE INFORMATION ZH
DOOR CYLINDER LOCK SWITCH
REMOVAL
The Driver Cylinder Lock Switch (1) is an integral part
of the Driver Door Lock Actuator assembly and cannot
be adjusted or repaired. If faulty, worn, or damaged,
the entire assembly must be replaced. (Refer to 8 -
ELECTRICAL/POWER LOCKS/DRIVER DOOR
LATCH SWITCH - REMOVAL).
INSTALLATION - DRIVER CYLINDER LOCK SWITCH
The Driver Cylinder Lock Switch is an integral part of the Driver Door Lock Actuator assembly and cannot be
adjusted or repaired. If faulty, worn, or damaged, the entire assembly must be replaced. For installation procedures,
refer to the Body Section. (Refer to 8 - ELECTRICAL/POWER LOCKS/DRIVER DOOR LATCH SWITCH -
INSTALLATION).
ANTI-THEFT TOW SENSOR
REMOVAL
1. Remove the right side trunk inner trim panel.
2. Remove the bolt (1) from the anti-theft tow sensor
bracket.