Chrysler 2005 Crossfire SRT6 Service Manual page 742

8E - 40 ELECTRONIC CONTROL MODULES - ELECTRICAL DIAGNOSTICS
*NO RESPONSE FROM CONTROLLER ANTILOCK BRAKE (CONTINUED)
FUSED B+ CIRCUIT(S) OPEN
TRACTION SYSTEM RELAY OUTPUT CIRCUIT OPEN
GROUND CIRCUIT(S) OPEN
SCI TRANSMIT CIRCUIT OPEN
SCI TRANSMIT CIRCUIT SHORTED TO GROUND
SCI TRANSMIT CIRCUIT SHORTED TO VOLTAGE
SHIFT LEVER ASSEMBLY
CONTROLLER ANTILOCK BRAKE MODULE
For a complete Data Link Connector Circuit Diagram, (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MOD-
ULES - SCHEMATICS AND DIAGRAMS).
Diagnostic Test
1.
CHECK COMMUNICATION WITH OTHER MODULES
Turn the ignition on.
Using the DRB III , attempt to communicate with the PCM.
Is the DRB III able to communicate with the PCM?
Yes >> Go to 2
No >> Perform Symptom *No Response From All Modules.
2.
CHECK COMMUNICATION WITH OTHER MODULES ON SCI TRANSMIT CIRCUIT
With the ignition on.
Using the DRB III , attempt to communicate with the Shift Lever
Assembly.
Is the DRB III able to communicate with the Shift Lever
Assembly?
Yes >> Go to 3
No >> Go to 7
POSSIBLE CAUSES
ZH