Chrysler 2005 Crossfire SRT6 Service Manual page 869

ZH
*REAR WINDOW DEFOGGER INOPERATIVE (CONTINUED)
5.
MEASURE REAR WINDOW DEFOGGER SUPPLY CIRCUIT RESISTANCE
Turn the ignition off.
Disconnect the CLP/SSM C2 harness connector.
Measure the resistance of the Rear Window Defogger Grid Supply cir-
cuit from the CLP/SSM C2 harness connector to the Rear Window
Defogger Grid harness connector terminal 2.
Is the resistance below 5.0 ohms?
Yes >> Replace the Central Locking Pump/Security System Mod-
ule. (Refer to 8 - ELECTRICAL/VEHICLE THEFT SECU-
RITY/SENTRY
REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Rear Window Defogger Grid Supply circuit for
an open.
Perform BODY VERIFICATION TEST.
KEY REMOTE ENTRY
HEATED GLASS - ELECTRICAL DIAGNOSTICS 8G - 9
MODULE -