Chrysler 2005 Crossfire SRT6 Service Manual page 1021

ZH
and audible tones. The Instrument Cluster indicator lamps are displayed by text overlays that show the lamps func-
tion. The inputs to the Instrument Cluster are transmitted via hard wired sensors, or through the Controller Area
Network (CAN) data bus.
The Instrument Cluster is equipped with a microprocessor designed to analyze the incoming data for the indicator
lamps and audible tones. The program and the data required are stored in an electronic memory chip called the
Erasable Electronic Programmable Read Only Memory (EEPROM).
The indicator lamps are listed below according to their type and actuation method (hard wired or CAN Bus).
HARD WIRE ACTUATED INDICATOR LAMPS
• Low tire pressure indicator lamp
• Left turn signal indicator lamp
• Right turn signal indicator lamp
• High beam indicator lamp
• Low fuel level indicator lamp
• Low washer fluid indicator lamp
• Low coolant level indicator lamp
• Battery voltage indicator lamp
• Seat belt indicator lamp
• Lamp outage indicator lamp
• Malfunction Indicator Lamp (MIL)
• Brake Assist System (BAS) MIL
• Electronic Stability Program (ESP) warning lamp
• Supplemental Restraint System (SRS) MIL
CAN BUS ACTUATED INDICATOR LAMPS
• Brake warning indicator lamp
• Brake wear indicator lamp
• Antilock Brake System (ABS) warning indicator lamp
HARD WIRE ACTUATED AUDIBLE TONES AND INDICATOR LAMPS
• Turn signal (audible tone & indicator lamp)
• Seat belt reminder (audible tone & indicator lamp)
• Headlamps on reminder (audible tone)
• Key in ignition warning (audible tone)
CAN BUS ACTUATED AUDIBLE TONES
• Parking brake warning
INSTRUMENT CLUSTER - SERVICE INFORMATION 8J - 67