Chrysler 2005 Crossfire SRT6 Service Manual page 1586

8R - 16 WIPERS/WASHERS - ELECTRICAL DIAGNOSTICS
*WIPERS INOPERATIVE (CONTINUED)
4.
MEASURE WIPER SWITCH RESISTANCE
Measure the resistance of the Wiper Switch from the Multi-Function
Switch connector with the wiper switch in intermittent, then low, then
high positions.
Are the resistance readings below 1K ohms?
Yes >> Repair the Wiper Switch Mux circuit for an open.
Perform BODY VERIFICATION TEST.
No >> Replace the Multi-Function Switch. (Refer to 8 - ELECTRI-
CAL/LAMPS/LIGHTING - EXTERIOR/MULTI-FUNCTION
SWITCH - REMOVAL)
Perform BODY VERIFICATION TEST.
ZH