Chrysler 2005 Crossfire SRT6 Service Manual page 1563

ZH
REMOVAL
REMOVAL - SENTRY KEY REMOTE ENTRY MODULE
1. Disconnect the negative battery cable.
2. Remove the instrument cluster to gain access to
the SKREEM module. (Refer to 8 - ELECTRICAL/
INSTRUMENT CLUSTER - REMOVAL).
3. Disconnect the 2-pin CAN bus connector and the
18-pin electrical connector (1) from the SKREEM.
4. Disconnect the 2-pin connector for the sentry key
antenna ring.
5. Press the retaining tabs apart.
6. Remove the SKREEM from the base plate.
REMOVAL - SENTRY KEY ANTENNA RING
1. Remove the instrument cluster. (Refer to 8 - ELEC-
TRICAL/INSTRUMENT CLUSTER - REMOVAL).
2. Disconnect the sentry key antenna ring electrical
connector (1) from the sentry key remote entry
module (2).
VEHICLE THEFT SECURITY - SERVICE INFORMATION 8Q - 57