Chrysler 2005 Crossfire SRT6 Service Manual page 1474

8O - 118 RESTRAINTS - SERVICE INFORMATION
INSTALLATION
INSTALLATION — LEFT SIDE
1. Verify the negative battery cable (2) is discon-
nected before proceeding. Wait two minutes for
the system capacitor to discharge before fur-
ther service.
2. Position the side impact sensor (1) on the body
cross brace.
3. Install the bolts attaching the side impact sensor to
the body cross brace. Tighten the side impact sen-
sor bolts to 12 N·m (106 in. lbs.).
CAUTION: Use caution when connecting the squib
harness connector to the side impact sensor
receptacle. Improper assembly of these connec-
tors can result in damage to the airbag circuits or
connector insulators.
4. Connect the side impact sensor harness connector.
ZH