Chrysler 2005 Crossfire SRT6 Service Manual page 1408

8O - 52 RESTRAINTS - ELECTRICAL DIAGNOSTICS
PASSENGER AIRBAG ON/OFF SWITCH SIGNAL CIRCUIT (CONTINUED)
5.
MEASURE THE PASSENGER SEAT OCCUPANT SIMULATOR GROUND CIRCUIT RESISTANCE
WARNING: TURN THE IGNITION OFF, DISCONNECT THE BAT-
TERY AND WAIT TWO MINUTES BEFORE PROCEEDING.
Measure the resistance between ground and the Passenger Seat
Occupant Simulator Ground circuit.
Is the resistance below 5.0 ohms?
Yes >> Replace the Passenger Seat Occupant Simulator. (Refer
to 8 - ELECTRICAL/RESTRAINTS/ON / OFF SWITCH
INDICATOR MODULE - REMOVAL).
Perform AIRBAG VERIFICATION TEST.
No >> Repair the Passenger Seat Occupant Simulator Ground
circuit for an open.
Perform AIRBAG VERIFICATION TEST.
Note: When reconnecting the Airbag System components, the ignition must be turned off and the battery
must be disconnected.
ZH