Chrysler 2005 Crossfire SRT6 Service Manual page 1353

ZH
1. Disconnect the negative battery cable.
2. Remove the door interior trim panel. (Refer to 23 -
BODY/DOOR - FRONT/TRIM PANEL - REMOVAL).
3. Carefully peel back the door watershield (1)
enough to expose the power window motor attach-
ment rivets and harness connector.
Note: Use caution to properly support the power
window motor before drilling rivets.
4. Disconnect the power window motor harness con-
nector (1).
5. Drill out the three power window motor attaching
rivets (2).
6. Remove the power window motor from the door.
POWER WINDOWS - SERVICE INFORMATION 8N - 123