Chrysler 2005 Crossfire SRT6 Service Manual page 1326

8N - 96 POWER SEATS - SERVICE INFORMATION
DIAGNOSIS AND TESTING
Before any testing of the Power Seat System is performed, the battery should be fully charged. All the wiring har-
ness connectors should be inspected and cleaned, if necessary, to ensure good connections.
1. If all of the power seat functions are inoperative, check Fuse 22 for the driver seat, and Fuse 21 for the pas-
senger seat in the Underhood Accessory Fuse Block.
2. With the dome lamp on, apply the power seat switch in the direction of the failure.
3. If the dome lamp dims, the seat or the power seat track may be jammed. Check under and behind the seat for
binding or obstructions.
4. If the dome lamp does not dim, proceed with testing of the individual power seat system components and cir-
cuits.
For complete power seat system diagnosis, refer to Power Seats Electrical Diagnostics in this section.
SPECIFICATIONS
TORQUE SPECIFICATIONS
DESCRIPTION
Front Riser Motor
Attachment Screw
Horizontal Motor
Attachment Screw
Rear Riser Motor
Attachment Nut
POWER SEAT SWITCH
DIAGNOSIS AND TESTING
For complete power seat system diagnosis, refer to Power Seats Electrical Diagnostics in this section.
REMOVAL
1. Remove the front seat. (Refer to 23 - BODY/
SEATS/SEAT - REMOVAL).
2. Remove the bolt (1) attaching the side panel to the
seat base.
N·m
4
4
4
Ft. Lbs.
—
—
—
ZH
In. Lbs.
35
35
35