Chrysler 2005 Crossfire SRT6 Service Manual page 1253

ZH
DOOR LOCK/DOOR UNLOCK SWITCH SENSE CIRCUIT (CONTINUED)
4.
MEASURE THE VOLTAGE OF THE DOOR LOCK SWITCH SENSE CIRCUIT
Turn the ignition on.
Measure the voltage of the Door Lock Switch Sense circuit at the
SKREEM C1 harness connector.
Is the voltage above 1.0 volts?
Yes >> Repair the Door Lock Switch Sense circuit for a short to
B(+).
Perform BODY VERIFICATION TEST.
No >> Go to 5
5.
MEASURE THE VOLTAGE OF THE DOOR UNLOCK SWITCH SENSE CIRCUIT
Measure the voltage of the Door Unlock Switch Sense circuit at the
SKREEM C1 harness connector.
Is voltage above 1.0 volts?
Yes >> Repair the Door Unlock Switch Sense circuit for a short to
B(+).
Perform BODY VERIFICATION TEST.
No >> Go to 6
POWER LOCKS - ELECTRICAL DIAGNOSTICS 8N - 23