Chrysler 2005 Crossfire SRT6 Service Manual page 1618

8R - 48 WIPERS/WASHERS - SERVICE INFORMATION
INSTALLATION
1. Install the pivot end of the wiper arm (2) on the
wiper pivot shaft.
2. Install the wiper arm attachment nut (1) finger tight.
3. Carefully set the wiper arm down so the wiper
blade touches the glass surface.
4. Align the center of the wiper blade (2) with the top
of the dot matrix (1) on the bottom of the wind-
shield. Torque the wiper arm retaining nut to 19
N·m (14 ft. lbs.).
ZH