Cisco Catos For Catalyst Switches - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CONFIGURING DSMS REV 1 Manual

13
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
C C
ISCO AT
S
WITCHES
A STRM Cisco CatOS for Catalyst Switches DSM accepts events using syslog.
STRM records all relevant device events. Before configuring a Cisco CatOS
device in STRM, you must configure your device to send syslog events to STRM.
To configure the device to send syslog events to STRM:
Log in to the Cisco CatOS interface and enter privileged EXEC mode.
Configure the system to timestamp messages:
set logging timestamp enable
Specify the IP address of the STRM server:
set logging server <IP address>
Limit messages that are logged by selecting a severity level:
set logging server severity <server severity level>
Specify the facility level that should be used in the message. The default is local7.
set logging server facility <server facility parameter>
Enable the switch to send syslog messages to the STRM server.
set logging server enable
You are now ready to configure the sensor device within the STRM interface. To
configure STRM to receive events from a Cisco CatOS device, you must select the
Cisco CatOS for Catalyst Switches option from the Sensor Device Type
drop-down list box. For more information on configuring sensor devices, see the
Managing Sensor Devices Guide.
Configuring DSMs Guide
OS C
FOR ATALYST