Other Default Configuration Settings - Digi TX40 User Manual

Firmware configuration
Interface type
Bridges
Hotspot

Other default configuration settings

Feature
Central
management
Security policies
TX40 User Guide
Preconfigured interfaces
n Hotspot access point: Digi
Hotspot AP (Wi-Fi1)
Hotspot access point: Digi
n
Hotspot AP (Wi-Fi2)
Bridge: LAN
n
n hotspot_bridge
hotspot
n
Configuration
n Digi Remote Manager enabled as the central management service.
n Packet filtering allows all outbound traffic.
SSH and web administration:
n
Review TX40 default settings
Devices Default configuration
n Wi-Fi1 n Disabled
n SSID: Digi Hotspot
radio:
n Encryption: Open
wifi1
(Unencrypted)
Wi-Fi2 Disabled
n n
n SSID: Digi Hotspot
radio:
n Encryption: Open
wifi2
(Unencrypted)
Ethernet: Enabled
n n
n Used by the LAN
ETH2
Wi-Fi access interface
n
point: Digi
AP (Wi-Fi1)
n Wi-Fi access
point: Digi
AP (Wi-Fi2)
n Wi-Fi access n Disabled
Used by the hotspot
n
point: Digi
interface
Hotspot AP
(Wi-Fi1)
n Wi-Fi access
point: Digi
Hotspot AP
(Wi-Fi2)
Bridge: Disabled
n n
n Authentication
hotspot_
mode: Click-through
bridge
n IP address:
10.1.0.1/24
n DHCP server:
Automatically
enabled (on all
hotspots)
n DHCP server lease
range: 100-250
36