Table of Contents
Advertisement
System administration
b. Reboot the device:
Update firmware from a local file
Web
1. Download the TX40 operating system firmware from the Digi Support FTP site to your local
machine.
Log into the TX40 WebUI as a user with full Admin access rights.
2. On the main menu, click System. Under Administration, click Firmware Update.
3. Click Choose file.
4. Browse to the location of the firmware on your local file system and select the file.
5. Click Update Firmware.
Command line
1. Download the TX40 operating system firmware from the Digi Support FTP site to your local
machine.
2. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
3. Load the firmware image onto the device. We recommend using the /tmp directory.
TX40 User Guide
Applying firmware version '23.9.74.0'...
41388K
netflash: got "/tmp/cli_firmware.bin", length=42381373
netflash: authentication successful
netflash: vendor and product names are verified.
netflash: programming FLASH device /dev/flash/image1
41408K 100%
Firmware update completed, reboot device
>
> reboot
>
Update system firmware
972
Advertisement
Table of Contents
