Table of Contents
Advertisement
Wi-Fi
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi.
4. Click to expand the appropriate Wi-Fi radio.
5. For Tx power percentage, type or select the appropriate percentage for the Wi-Fi radio's
transmit power.
6. Click Apply to save the configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Set transmit power for the radio:
a. Determine available radios:
(config)> network wifi radio ?
Additional Configuration
----------------------------------------------------------------------
---------
wifi1
wifi2
(config)> network wifi radio
TX40 User Guide
Configure the Wi-Fi radio's transmit power
Wi-Fi1 radio
Wi-Fi2 radio
307
Advertisement
Table of Contents
