Table of Contents
Advertisement
Interfaces
Edit the preconfigured LAN bridge
Required configuration items
Enable or disable the bridge.
n
Modify the devices included in the bridge.
n
Additional configuration items
Enable Spanning Tree Protocol (STP).
n
To edit the preconfigured LAN bridge:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Bridges > LAN.
4. The LAN bridge is enabled by default. To disable, toggle off Enable.
5. Modify the list of devices that are a part of the bridge. By default, the LAN bridge includes the
following devices:
Ethernet: ETH2
n
Wi-Fi access point: Digi AP (Wi-Fi1)
n
Wi-Fi access point: Digi AP (Wi-Fi2)
n
Note
The MACaddress of the bridge is taken from the first available device in the list.
a. To delete a device from the bridge, click the down arrow () next to the field label and
select Delete.
TX40 User Guide
Use Digi Remote Manager to view and manage your
Bridging
225
Advertisement
Table of Contents
