Table of Contents
Advertisement
Serial port
Show serial status and statistics
To show the status and statistics for the serial port:
Web
Log into the TX40 WebUI as a user with full Admin access rights.
1. On the main menu, click Status
2. Under Connections, click Serial.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show serial
> show serial
Label
--------
Serial 1
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Review the serial port message log
Serial port messages can be reviewed from the Serial Port Log page.
A serial port message log is created and saved when serial port logging has been enabled and
configured for one of the following serial port modes: Login,
view the log file from the Log column in the Serial Status page.
Web
Log into the TX40 WebUI as a user with full Admin access rights.
1. On the main menu, click Status
2. Under Connections, click Serial. The Serial Status page displays.
3. If a green Log button is displayed, the serial port mode selected for the port supports serial
port logging, and logging is enabled. Click the Log button to open the Serial Port Log page for
that port. The Serial port log window displays.
Note
If the Log button is gray, the serial port mode selected for the port supports serial port
logging, but logging is not enabled. If there is no Log button, the serial port mode selected for
the port does not support serial port logging.
TX40 User Guide
command:
Port
Enable
Mode
-----
------
-----
port1
true
login
Show serial status and statistics
Baudrate
--------
115000
Remote
Access, or
UDP
Serial. You can
295
Advertisement
Table of Contents
