Digi TX40 User Manual page 832

Applications
1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Determine the name of scripts that are currently running:
> show scripts
Index Label
----- -----------
0 script1
1 script2
>
3. Start the script:
)> system script start script1
>
4. Save the configuration and apply the change
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
TX40 User Guide
Enabled Status Run time
------- ------ --------
true active
true idle 01:00
Start a manual script
832