Table of Contents
Advertisement
Wi-Fi
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Client mode connections.
4. For Add WiFi client:, type the name of the client and click .
The Wi-Fi client configuration window is displayed.
New Wi-Fi clients are enabled by default. To disable, toggle off Enable.
5. For Radio, select the appropriate Wi-Fi radio.
6. Configure the Wi-Fi network that the client will use:
a. Click to expand SSID list.
b. Enter the SSID of the access point that the client will use to connect to the Wi-Fi network.
c. Select the type of Encryption used by the access point.
n
n
TX40 User Guide
If a personal or mixed mode is selected, for Pre-shared key, enter the password
that the client will use to connect to the access point.
Note
If you need to configure a Wi-Fi passphrase with any non-printable ASCII
characters, you can use the wpa_passphrase tool to generate the appropriate pre-
shared key. The wpa_passphrase command is available in the shell console of a
DAL OS Digi device. For details about the command, see the
command.
If WPA2 Enterprise or WPA3 Enterprise is selected:
Select the Extensible Authentication Protocol (EAP), one of:
l
o
TLS: Client certificate authentication.
If TLS is selected, include:
o
The Username.
o
The CA certificate in PEM format.
Configure a Wi-Fi client and add client networks
wpa_passphrase Linux
340
Advertisement
Table of Contents
