Table of Contents
Advertisement
Wi-Fi
Required configuration items
n
Enable the Wi-Fi access point
n
Select a Wi-Fi radio for the access point.
n
The Service Set Identifier (SSID) for the access point.
n
Configure security for the access point to use personal security.
n
The password (preshared key) that clients will used to connect to the access point.
n
LAN/bridge assignment. Once you configure a Wi-Fi access point, you must assign the Wi-Fi
access point to a LAN interface or to a bridge. See
Configure a bridge
Additional configuration items
Determine whether to broadcast the access point's SSID.
n
Determine whether to isolate clients connected to this access point, so that they cannot
n
communicate with each other.
The amount of time to wait before changing the group key.
n
To configure a Wi-Fi access point to use personal security:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Access points.
4. Create a new access point or modify an existing access point:
To create a new access point, for Add WiFi access point:, type a name for the access
n
point and click .
TX40 User Guide
Configure a Wi-Fi access point with personal security
for more information.
Use Digi Remote Manager to view and manage your
Configure a Local Area Network (LAN)
and
315
Advertisement
Table of Contents
